You still want to avoid putting the tape in the path of the cutter if possible to keep the tape from getting on the bit, but at least it pulls off clean without leaving little pieces that you have to pick off. I got the 1" wide and that holds very well. Its called XFasten and comes in various widths. I holds very well, but comes off perfectly clean unlike the tape I was using before, and its relatively cheap. It works great so I thought I’d pass it on. JKM in the above video recommended one brand of tape, but they were sold out so I just tried one I found on Amazon that was made for woodworking hold down. I watched a few peoples videos and realized there is a huger difference in tape, and carpet tape is not meant to come off as easy and the main thing people hate about two sided tape is the goo, and if you have the right tape made for temporary hold down, it comes off very nicely. Jonathan Katz-Moses sums up my reasons for liking double sided tape better than blue tape pretty well here: Double Sided Tape VS The Blue Tape Trick - YouTube At about the same time I got a comment on one of my videos suggesting the blue tape/CA glue method, which I’ve tried and never liked. Then my roll ran out and I tried one from Home Depot and it was a horrible gooey mess. The high-friction nature of this tape makes it an ideal wrap.I had been using carpet tape from Lowes as a two sided tape for hold downs. Guard tape is also useful for improving the grip on hand tools. Plus, it holds its shape well, allowing it to slip on and off your fingers easily. Comprised of a cotton gauze coated with a latex compound, high-friction guard tape is perfect for protecting your fingers when doing carving work. There is no obvious adhesive, and it will only stick to itself, not other things. This final tape is not really a “tape” in the true sense of the word. In addition, the tape keeps unsightly black stains off my workpieces. Any glue that squeezes out onto the clamp can simply be “chipped” off with the light touch of a scraper. It allows me to easily position heavy workpieces for glueup. As you see here, I like to use UHMW tape on my pipe clamps. It not only makes the drawers function effortlessly, it also helps prevent wear on the runners. It also works wonders on wood drawer runners. UHMW tape is perfect for use with jigs, fixtures, or on the face of a table saw rip fence. This “slick tape” is perfect for making parts slide more easily. Ultra-high-molecular-weight (UHMW) polyethylene tape is another great product to keep in the shop. A J-roller should be used to apply even pressure over the entire surface. To use, simply apply the tape to one surface, peel off the paper liner and press the material to the tape. Designed to adhere laminates, veneers, or edge banding to a worksurface, this tape is also strong enough to be used for cabinet refacing. It sets up to maximum strength within 24 hours. This double-sided acrylic tape is incredibly sticky stuff that provides instant adhesion. Double-sided tape is used as a temporary fix to hold materials down on the surface of a CNC. The tape allows the cutting blade of the engraving tool to be mounted on the end of your router, or spindle (depending on which type of CNC model you own). When I don’t want to deal with the hassle of contact cement or a messy spray adhesive, I grab my roll of SpeedTape by FastCap that you see here. The double-sided tape comes in handy when you are ready to turn your CNC machine into an engraver. Simply place the tape, mark your cut line, and make the cut. This particular tape is labeled as “delicate surface.” It provides a low adhesion to your workpiece and removes cleanly. To prevent tearing out fibers when cutting cabinet-grade plywood, I prefer to use a low-tack painter’s tape like the FrogTape that you see here. It can even double as a “clamp” when joining small parts. Besides being useful for masking off areas when finishing parts, painter’s tape also helps to keep glue squeeze-out off of finished areas when doing assembly work. Because masking tape is notorious for being difficult to remove and for leaving gummy residue on worksurfaces, painter’s tapes are hands down the perfect alternative. Masking tape has all but been replaced by the newer painter’s tapes available today. Also, it leaves no residue when removed, something that can’t be said for regular carpet tape. Another advantage of this tape is that it tears conveniently by hand, eliminating the need to track down scissors or a utility knife. Once in position, the tape allows no lateral movement, but can be repositioned on the workpiece easily. Then the other less tacky side can be attached to the workpiece. One side has a “permanent” adhesive that is fixed to the template first. Because the two sides of the Avery Dennison tape each use a different adhesive, it excels at attaching a template to a workpiece. This tape, shown in use below, has several advantages over standard carpet tapes. While “carpet tape” has long been a mainstay in many woodworking shops, I have recently become a fan of the double-sided woodworking tape made by Avery Dennison.
0 Comments
Mine are literally a night and day difference. +1 on the Hella G4 projectors from blacknight530i. I do not know if it can be added/cut out appropriately. Yes, there are differences between the halogen and xenon back housings, namely that the halogen housings do not include the cutout for the auto-leveling motor. Bixenons imply that the car has a xenon high beam, but no E39s did. It's worth pointing out that OP doesn't have "bixenons", but rather standard xenons. Yep, September 02 is the cutoff date from everything I remember. I was totally blown away after I installed the last set that I did.+1 on the Hella G4 projectors from blacknight530i. Don't forget, for brand new projectors guns, Blacknight can also hook you up. He has everything concerning headlight bits, ballasts, projectors, adjusters, the chrome bezels, brand new lenses, the rubber seals for the bulb holders, everything. If you or anyone needs to get a hold of him, send me a pm, I'll pass your info on to him and he can contact you. I'd give you three guesses as to who, but you'd only need one. Yeah, Cal45fan's expulsion from this forum was total bs, his only fault was that he wasn't a paying vendor on the site, and one of the supporting vendors cried foul. Got everything, but procrastination is King. It's a fun project, I actually have another set to do, one of these days, I'll get to it. Off course, I had bought new lens covers. I had to bust up my lenses, cutting with an air saw, leaving an inch all they way around, I then carefully cut slits every inch up to the channel, ducknose pliers grip the pieces very well, and pull out the 1 inch sections, one at a time, then a Dremel and a reamer bit to eat up the urethane, completely clean the channel without punching through the back side. If your light housing is made after September of 2002, BMW changed from rubber butyl to seal the lens to the housing, to urethane epoxy, baking it will not do anything. And definitely buy new adjusters and install them while the lights are opened up. Blacknight530 on here sells awesome projector guns for like $100, if you want to go that route. Inspect your projector, the chrome in the lens bowl gets corroded after all these years, and the output is just not as good as when it was new, also clean both sides of the projectors glass lens with a fine rag that doesn't leave lint, wear gloves, if you leave your fingerprints on there, they will show when the lights are on. The things that are different are, the projectors, and the chrome bezel for the projector, which is also the same part as the high beam lens. Traffic was normal for a workday afternoon. It was a sunny day and the road was clear and dry. "On Tuesday, October 17, 2021, at around 3:30 P.M., I was stopped at a red light at First Street and Vine in downtown Metropolis City. This is the "who, what, when, and where" portion of your demand letter. What Should I Include in a Personal Injury Demand Letter?Ī good personal injury demand letter will discuss these four things: If your case doesn't settle, you'll have chances to tell your story in more detail later. Keep your demand letter business-like and factual. The adjuster who will read your demand letter wants facts-what happened, how it happened, how you were hurt, and your damages. To the insurance company, yours is just another case among thousands. But as a rule, you want to keep your emotions out of a personal injury demand letter. You're writing this demand letter about something bad that happened to you. Preparing Your Demand Letter: Style and Toneīefore we cover what you should include in your demand letter, let's talk about style and tone. You'll be better prepared to go to court if you don't settle and have to file a lawsuit. Taking these sorts of steps helps you think through every aspect of your case, including the facts, the applicable law, and the evidence you'll need to prove your claim. You must track down witnesses and get statements. You'll have to contact doctors' offices, hospitals, pharmacies, and other providers to gather medical records and bills. You'll need written proof of any wages and benefits from your employer that you've lost as a result of your injuries. In an auto accident case, for example, part of your preparation would be getting the police report and, if possible, speaking to the reporting officer. Before you begin writing, you'll need to gather the evidence to prove your case. Writing a demand letter to an insurance company is a process, one that takes time and effort. A Demand Letter Helps You Organize Your Case If the adjuster takes you and your case seriously, that, too, increases the odds of a settlement. A well-written demand letter backed up by solid evidence sends the insurance company a message: You know what you're doing and you won't just go away. These are people who are responsible for dozens, even hundreds, of personal injury claims. Keep in mind that in most cases, your demand letter is going to an insurance company adjuster. In short, your chances of getting paid are likely to increase when you make your case in writing. Even if earlier conversations with your opponent have gone nowhere, laying out the facts, your injuries, and the reasons why the other side is responsible may jump start settlement negotiations. The ultimate goal of any demand letter is to prompt settlement without a lawsuit. Lawsuits are expensive, time consuming, and stressful. Because it requires that you explain your position, it helps you get your case organized.ġ.It sends a message: that you-and your case-need to be taken seriously.It may encourage your opponent to settle.(One of these points has to do with the special procedures you must follow if you want to sue the government.) Why Is a Personal Injury Demand Letter Important?Ī well-written personal injury demand letter does three things: We'll close with a few points to keep in mind throughout the process. Second, it describes what you need to include in your personal injury demand letter. First, it explains why a demand letter is important. A demand letter is simply a written request to settle your personal injury claim before you file a lawsuit. In most personal injury (PI) cases, settlement negotiations begin with a demand letter. Focus your demand letter on the facts only and make sure you have proof it was delivered to your opponent.A demand letter encourages settlement, sends a message that you're serious about your case, and helps you get organized for your case.An effective demand letter outlines the facts of the case and explains why your opponent is legally responsible for the amount you're requesting.Most personal injury settlement negotiations start with a demand letter. Several other Nintendo characters have seemed like odd choices for their respective games. Game & Watch, it should be able to incorporate Steve as well. However, I don’t see a problem with Steve’s inclusion in “Super Smash Bros. The character that Nintendo added to the game’s lineup was none other than Steve from “Minecraft.” Players have questioned how Steve would fit into the game, wondering what he would bring to the character lineup. A few of these additions have surprised players, and the newest arrival to the “Super Smash Bros. Every couple of months, new characters across multiple franchises are added to the game. There’s no way to truly be bored of this game, especially because of its frequent updates. Brawl” as well as other games in the “Super Smash Bros.” series. Expectations for the game were high due to the success of “Super Smash Bros. Ultimate” to Nintendo Switch before its release on Dec. Several trailers teased the arrival of “Super Smash Bros. Maybe it was her design or her abilities, but I felt myself drawn to the character. I can’t seem to recall why, but my favorite character in the game had to be Samus from the “Metroid” series. I remember waking up on the weekends and racing to turn on the Wii so that I could play my favorite game. Brawl” is a game that I have loved ever since I was a child. Renata Diaz, Staff Writer | October 15, 2020 |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |